0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Design Method and Finite Element Analysis of Precast Longitudinal Split-Piece Cover Beam

 Design Method and Finite Element Analysis of Precast Longitudinal Split-Piece Cover Beam
Autor(en): , ,
Beitrag für IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022, veröffentlicht in , S. 1088-1096
DOI: 10.2749/nanjing.2022.1088
Preis: € 25,00 inkl. MwSt. als PDF-Dokument  
ZUM EINKAUFSWAGEN HINZUFÜGEN
Vorschau herunterladen (PDF-Datei) 0.15 MB

In order to reduce the weight of prefabricated cover girders and solve the construction problem that it is difficult to realize one-time prefabricated assembly of large cantilever concrete cover gi...
Weiterlesen

Bibliografische Angaben

Autor(en): (Tongji University, Yangpu District, Shanghai, China)
(Tongji University, Yangpu District, Shanghai, China)
(Tongji University, Yangpu District, Shanghai, China)
Medium: Tagungsbeitrag
Sprache(n): Englisch
Tagung: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022
Veröffentlicht in:
Seite(n): 1088-1096 Anzahl der Seiten (im PDF): 9
Seite(n): 1088-1096
Anzahl der Seiten (im PDF): 9
DOI: 10.2749/nanjing.2022.1088
Abstrakt:

In order to reduce the weight of prefabricated cover girders and solve the construction problem that it is difficult to realize one-time prefabricated assembly of large cantilever concrete cover girders, urban viaducts usually use large cantilever prestressed concrete cover girders. Taking a 2×30m simply-supported girder bridge as the superstructure, the paper proposes a precast longitudinal split type cover girder, and uses the large general finite element analysis software WISEPLUS to establish a finite element model to simulate and adjust the structural structure, prestressing distribution, and construction stage division of each cover girder (single 1,0m, 0,9m, 0,8m), and the cover girder under this design method in the construction stage and The design method is used to verify the feasibility and reasonableness of the design scheme, and to provide methods and references for similar designs.

Stichwörter:
Finite-Elemente-Analyse
Copyright: © 2022 International Association for Bridge and Structural Engineering (IABSE)
Lizenz:

Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden.